Forum Discussion

TRAN_HIEU_007's avatar
TRAN_HIEU_007
Icon for Occasional Contributor rankOccasional Contributor
5 years ago
Solved

Cyclone 10GX with 2 port SFP 1G test.

I am designed a custom Broad with Cyclone 10GX and 1G SFP interface. I am using project test altera_eth_tse_native_phy_w_1588. I have been run TEST_PHYSERIAL_LOOPBACK and TEST_SMA_LB was succesfull i...
  • TRAN_HIEU_007's avatar
    TRAN_HIEU_007
    5 years ago

    Hi SengKok! All issues have been resolved. This error is caused by CLK signal for GXB. My custom broad Cyclone10GX ran successful 2 port SFP 1000 Base-X and 2 port 1000 Base-T. Thank!

TRAN_HIEU_007's avatar
TRAN_HIEU_007
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

XCVR and TSE ping tests ran in Cyclone 10GX KIT but not ran in my custom board. Can you tell me why and how to fix the above problem to work properly XCVR? VCCT_GXB = VCCR_GXB = 1.03V; VCCH_GXB = 1.8V and all signal TX and RX same in both my wide KIT and custom DEV.