Forum Discussion

TRAN_HIEU_007's avatar
TRAN_HIEU_007
Icon for Occasional Contributor rankOccasional Contributor
4 years ago
Solved

Cyclone 10GX with 2 port SFP 1G test.

I am designed a custom Broad with Cyclone 10GX and 1G SFP interface. I am using project test altera_eth_tse_native_phy_w_1588. I have been run TEST_PHYSERIAL_LOOPBACK and TEST_SMA_LB was succesfull i...
  • TRAN_HIEU_007's avatar
    TRAN_HIEU_007
    4 years ago

    Hi SengKok! All issues have been resolved. This error is caused by CLK signal for GXB. My custom broad Cyclone10GX ran successful 2 port SFP 1000 Base-X and 2 port 1000 Base-T. Thank!

SengKok_L_Intel's avatar
SengKok_L_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

If the SMA loopback on channel 0 is passing, then please focus on your hardware setup first.

TEST_SMA_LOOPBACK 0 1G 1000


Please check if the channel 0 SFP loopback is passing.

TEST_1588 0 0 1G