Forum Discussion

TRAN_HIEU_007's avatar
TRAN_HIEU_007
Icon for Occasional Contributor rankOccasional Contributor
5 years ago
Solved

Cyclone 10GX with 2 port SFP 1G test.

I am designed a custom Broad with Cyclone 10GX and 1G SFP interface. I am using project test altera_eth_tse_native_phy_w_1588. I have been run TEST_PHYSERIAL_LOOPBACK and TEST_SMA_LB was succesfull i...
  • TRAN_HIEU_007's avatar
    TRAN_HIEU_007
    5 years ago

    Hi SengKok! All issues have been resolved. This error is caused by CLK signal for GXB. My custom broad Cyclone10GX ran successful 2 port SFP 1000 Base-X and 2 port 1000 Base-T. Thank!

TRAN_HIEU_007's avatar
TRAN_HIEU_007
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Hi SengKok. I have been tried "AN744: Scalable Triple Speed Ethernet Reference Designs for Arria 10 Devices" but projet not ran in TEST_1588 0 1 1G test in above. In project "Single-Port Triple-Speed Ethernet and On-Board PHY Chip Reference Design - Arria 10 " TSE run in SGMII interface with 88e1111. But I need interface with SFP port.