Forum Discussion

KBhag3's avatar
KBhag3
Icon for New Contributor rankNew Contributor
6 years ago

Cyclone 10GX JTAG Programming

Hi, I am using Cyclone 10GX in one of my design. When I started testing my board, JTAG was not functioning properly. I could program Cyclone10 through JTAG at 1MHz but not beyond that. I tried diffe...
KBhag3's avatar
KBhag3
Icon for New Contributor rankNew Contributor
6 years ago

Dear Anand,

Does this mean the part I selected (MT25QU256ABA8ESF) is supported by Cyclone 10 GX but not validated yet by Intel? Do you suggest/Recommend any other footprint compatible device? Also, I want to know if you have any suggestion/corrections in my circuit related to Micron Flash.

Has any of your customer tested the AS booting with Micron Flash (with Cyclone 10 GX)?

I am sorry with too many questions but I am really stuck for last 3 weeks. I have time only till this week end to resolve the issue. I have designed 20+ Altera FPGA boards but never faced this type of booting issue till now.

Is it possible to support if I come there to Intel with one board?

Best regards,

Bhagavath