Forum Discussion

KBhag3's avatar
KBhag3
Icon for New Contributor rankNew Contributor
7 years ago

Cyclone 10GX JTAG Programming

Hi, I am using Cyclone 10GX in one of my design. When I started testing my board, JTAG was not functioning properly. I could program Cyclone10 through JTAG at 1MHz but not beyond that. I tried diffe...
AnandRaj_S_Intel's avatar
AnandRaj_S_Intel
Icon for Regular Contributor rankRegular Contributor
7 years ago

​

Hi Bhagavath,

We can finally suspect the flash device.

Let me escalated this case to AE. I will get back to you on this soon.

Regards

Anand

KBhag3's avatar
KBhag3
Icon for New Contributor rankNew Contributor
7 years ago

Dear Anand,

I have captured the top marking of the Micron Flash & the same is attached. Not sure if this will help.

Do you suggest any footprint compatible alternate part? I will quickly procure few of them & try if that helps.

Best regards,

Bhagavath