Forum Discussion

ljian6's avatar
ljian6
Icon for New Contributor rankNew Contributor
7 years ago

cyclone 10 pcie an829

hello, everyone ,I am use the cyclone 10 GX FPGA Development Kit ,when I use the an829 design example into the board, the pc's screen become like this : EFI Shell Version 2.31 [4.633] Current runni...
Vicky1's avatar
Vicky1
Icon for Regular Contributor rankRegular Contributor
7 years ago

Hi,

Everything is there, just refer this application note for cyclone 10 GX FPGA Development Kit,

  1. Check the DMA Reference Design Hardware and Software Requirements
  2. working with the reference design : download the reference design from below link ,take care of design templates & then compile the project, https://fpgacloud.intel.com/devstore/platform/2183/
  3. DMA Procedure Steps
  4. Then refer the setting Up the Hardware

Let me know if this has helped resolve the issue you are facing or if you need any further assistance.

Best Regards

Vikas Jathar

(This message was posted on behalf of Intel Corporation)