Forum Discussion

JLuke3's avatar
JLuke3
Icon for New Contributor rankNew Contributor
6 years ago

Cyclone 10 LP Evaluation Kit Configured LED not lit.

Have had this device for some 2 weeks After trying to download golden ref system from Board test system on next power up only blue power LED on. Reset and configure buttons have no effect. Jtagco...
JLuke3's avatar
JLuke3
Icon for New Contributor rankNew Contributor
6 years ago

OK Thanks that has fixed it. Now configure led on and 3 bit counter on other leds

I must have overwritten the flash somehow. Was afraid I might have blown the board up.

I followed the procedure on page 16 of ug_c10lp_eval_kit.pdf.

4.4.2 Program on-board EPCQ flash with the TEST.jic file which actually

seems to be epcq64.

Thanks

John Luke

AnandRaj_S_Intel's avatar
AnandRaj_S_Intel
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi John,

Good to know that you have solved the issue.

Yes ,TEST.jic file which actually for epcq64.

Regards

Anand