Forum Discussion

New Contributor

6 years ago

Configuration PROM for an Arria II GX device (EP2AGX65)

What's the correct Altera/Intel EPCS device (SPI Configuration PROM) to use with an Altera/Intel Arria II GX EP2AGX65CU17I3G device? In addition, I was going to use a Cypress (Infineon) SPI Configur...

ShafiqY_Intel

Frequent Contributor

5 years ago

Hi Hal,

You can use EPCQ, EPCQ-L or EPCQ-A device as a replacement for EPCS device.

https://www.intel.com/content/www/us/en/products/programmable/configuration-device.html

Thanks

Regards,

Matt

Forum Discussion

Configuration PROM for an Arria II GX device (EP2AGX65)

Recent Discussions

Agilex™ 7 FPGA M-Series Development Kit_HBM2e Edition_REVB2_Altera

Agilex 7 R-Tile PIPE Direct endpoint receives Set_Slot_Power_Limit, but no Config TLPs

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

R-tile CXL base hard IP example for the Agilex 7 M-series Dev Kit (DK_DEV_AGM039EA) does not work

PCIe Root Complex on DK-A5E013BM16AEA