Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorClock signal in De2-115
I am using DE2-115 development board. I have written a verilog code where I am trying to generate a sequence of 1' and 0's using the clock frequency of 50MHz and I am getting the output as shown in t...
Altera_ForumHonored Contributor
Honored ContributorThere is no problem at all, your clock looks fine. Sharp edges are only in drawings in science books. In reality you have unmatched impedances between systems, all the electromagnetic effects, etc. And with increasing frequency these things are getting only worse, try scope on 100 or 200 MHz clocks.
