Forum Discussion
SOlon
New Contributor
New ContributorCan GPIO Pins support clock frequencies around 100 MHz? DE10 nano dev. board
I generated 32 MHz clock frequency from 50 MHz using the PLL. I wanted to measure and see the clock with oscilloscope. I tried it using GPIO Pins und could not succeed with it. I used several differe...
SreekumarR_G_Intel
Frequent Contributor
Frequent ContributorCan you share the RTL which you assign to the GPIO ? when you mentioned about GPIO ; is it HPS side pin or FPGA pin ?
Thank you ,
Regards,
Sree
