Forum Discussion

snehal_p's avatar
snehal_p
Icon for Contributor rankContributor
1 year ago
Solved

Building uboot for cyclone V SoC

Hello, We want to build boot image for customized cyclone V SoC board. We are following the below document, using Quartus Prime 22.1 Standard Edition on Ubuntu 20.04 system, https://www.rocketb...
Fpga Devkit
  • tehjingy_Altera's avatar
    tehjingy_Altera
    1 year ago

    Hi Snehal


    Just to update the forum case.

    The missing steps from the RBO page are the steps below:


    1.Step to convert the sof to rbf. You could use the command below to convert the sof.

    quartus_cpf -c -o bitstream_compression=on soc_system.sof soc_system.rbf


    2.Missing u-boot.scr could be gotten from the gsrd page.

    https://releases.rocketboards.org/2025.03/gsrd/c5_gsrd/u-boot.scr


    3.Place both rbf and the u-boot.scr in the sdcard partition 1 (sdfs)


    Regards

    Jingyang, Teh


tehjingy_Altera's avatar
tehjingy_Altera
Icon for Regular Contributor rankRegular Contributor
1 year ago

Hi


Since there are no feedback for this case, I shall set this case to close pending. If you still need further assistance, you are welcome reopen this case within 20days or open a new case, someone will be right with you.

If you happened to close this case you will receive a survey. If you think you would rank your support experience less than 4 out of 5, please allow me to correct it before closing or if the problem can’t be corrected, please let me know the cause so that I may improve your future service experience.



Regards

Jingyang