Forum Discussion

New Contributor

5 years ago

Boot cyclone V soc from NAND-flash

Hi, everybody! I'm working with a SOM board (http://inmys.ru/products/som-cyclone-v-se) which has a QSPI-flash and a NAND-flash. I have no problems with booting from QSPI (I generated preloader_mkp...

EBERLAZARE_I_Intel

Regular Contributor

5 years ago

Hi,

Firstly, you may need to check the supported flash devices below:

https://www.intel.com/content/www/us/en/programmable/support/support-resources/supported-flash-devices-for-cyclone-v-and-arria-v-soc.html

Secondly, we do not have a design for Cyclone V SoC, but you may refer to how to do on the Arria 10 SoC:

https://rocketboards.org/foswiki/Documentation/BuildingBootloader#Arria_10_SoC_45_Boot_from_NAND

Forum Discussion

Boot cyclone V soc from NAND-flash

Recent Discussions

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

R-tile CXL base hard IP example for the Agilex 7 M-series Dev Kit (DK_DEV_AGM039EA) does not work

PCIe Root Complex on DK-A5E013BM16AEA

DK-DEV-AGI027RES Install Package

Cyclone V GT Dev Kit - new units fail to boot from FPP