Board installation

Question

Hi;I have the board of the DE1-Soc. I'm trying to implement the application here (https://www.intel.co.jp/content/dam/www/programmable/us/en/pdfs/literature/hb/opencl-sdk/ug-aoclstd-getting-started.pdf) with the Intel® FPGA SDK for OpenCL.  I work on Quartus 18.1 standart edition. But I'm also having trouble with custom platform installation. First of all I don't fully understand what a custom platform is.  How do I install this on my system?  I've followed the steps here (https://www.terasic.com.tw/attachment/archive/836/DE1SOC_OpenCL_v02.pdf), but I'm always having errors.  I could not find the answers to the questions that asked earlier in the forum.  I'd appreciate it if you could help me.Thank you.

muhammadar_u_intel · Answer

Hi,Custom platform means your custom board or in your case DE1-SOC devkit by terasic,Could you elaborate what Errors are you facing ?How you following the step by steps as explained in How to Video series ?https://www.youtube.com/watch?v=4PUKzI14mLYLet me know if this is helpful and you are able to proceed.Thanks,Arslan

kucar · Answer

Hi MUsman,The board_env.xml file shows exactly where it is shown but it gives an error as follows."Cannot find board_env.xml in C:\intelFPGA\17.1\hld\board	erasic\de1_soc;"In my first attempt, AOCL_BOARD_PACKAGE_ROOT showed the position I mentioned(C:\intelFPGA\17.1\hld\board	erasic\de1_soc), it found the a10_ref board. In the following attempts, the above error occurred.I'm really stuck here.

Forum Discussion

Board installation

2 Replies

Recent Discussions

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Mandelbrot viewer on Cyclone V - Platform Designer layout

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

Stratix 10 Development Kit HiLo connector