Forum Discussion

aamlb's avatar
aamlb
Icon for New Contributor rankNew Contributor
5 years ago

Arria10SoC Development kit: Failing to burn the on board QSPI flash

Hello, I prepared a binary stream for burning to the QSPI flash: 128MB (MT25QU01GBBA8E12-0SIT), which installed on J11. I followed the instructions on https://community.intel.com/t5/FPGA-Wiki/G...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
5 years ago

You were asking about the resolution for this 2 information right?

Info (20531): Read ID returned 0xFF 0xFF 0xFF

Info (20531): Read NVCR returned 0xFF 0xFF


Thus, you will need to provide NVCR in advance in order to get a value for NVCR.


aamlb's avatar
aamlb
Icon for New Contributor rankNew Contributor
5 years ago

Hi,

  1. Regarding the NVCR, please advice how and where to add the initial value in the flow chart.
  2. As far as I understand, the ID should be read without any additional initialization. Why it read with 0xFF.

Thank you.