Forum Discussion

New Contributor

6 years ago

Arria 10 SoC emif preset library family device does not match family device of the Dev Kit

Hi, I am trying to use the external memory interface IP and when I choose a device in the presets on the IP Parameter Editor (for arria 10 SoC) the arria 10 device family is not the same as the one...

Patricia

New Contributor

6 years ago

That's what I was referring to: the device family from the preset is not the same as the SoC board I have...

But I programed the device i have with the example and it seems to work fine.

Thanks,

Patricia

sstrell

Super Contributor

6 years ago

If you want to guarantee you're using the correct implementation and parameterization for your board, instead of choosing the preset from the parameter editor, use the example memory design that is included as part of the software download for the board.

https://www.intel.com/content/www/us/en/programmable/products/boards_and_kits/dev-kits/altera/arria-10-soc-development-kit.html

#iwork4intel

Forum Discussion

Arria 10 SoC emif preset library family device does not match family device of the Dev Kit

Recent Discussions

Agilex™ 7 FPGA M-Series Development Kit_HBM2e Edition_REVB2_Altera

Agilex 7 R-Tile PIPE Direct endpoint receives Set_Slot_Power_Limit, but no Config TLPs

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

R-tile CXL base hard IP example for the Agilex 7 M-series Dev Kit (DK_DEV_AGM039EA) does not work

PCIe Root Complex on DK-A5E013BM16AEA