Forum Discussion
aejjeh
New Contributor
New ContributorArria 10 GX FPGA Dev Kit OpenCL and PCIe drivers/runtime stopped working
We have an Arria 10 GX FPGA Dev Kit that we've been using for more than a year with the Intel FPGA SDK for OpenCL version 18.0 on Ubuntu 16.04. Recently (last week), the FPGA stopped working with the...
MEIYAN_L_Intel
Frequent Contributor
Frequent ContributorHi,
Can you check the thing as below:
1. Connection of USB cable
2. Swapping the USB cable
3. Checking the switches according to https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/an/an807.pdf
4. Running with the command aocl compile-config and aocl link-config.
Thanks
aejjehNew Contributor
New ContributorHi Mylee
The usb cable is working, jtag-config detects the board and works. I can program the board with no problem. Also, as I mentioned, the board was working previously, and I have previously configured all switches and jumpers according to an807. I confirmed that there was a kernel update prior to the board stopping to work.
