Forum Discussion

Occasional Contributor

6 years ago

Arria 10 GX dev kit board doesn't display anything on LCD after power up and doesn't connect to host via USB.

In an effort to debug other issues, I removed my new dev board from the host's PCIe and am using the DC power cable instead. When I switch power on, the LCD is backlit but blank. I used to see messag...

AR_A_Intel

Super Contributor

6 years ago

The readme.txt can be found in Table 3. Arria 10 FPGA Downloadable Content. This readme.txt file accompanies the Arria 10 FPGA Development Kit. https://www.intel.com/content/www/us/en/programmable/products/boards_and_kits/dev-kits/altera/kit-a10-gx-fpga.html

Forum Discussion

Arria 10 GX dev kit board doesn't display anything on LCD after power up and doesn't connect to host via USB.

Recent Discussions

Mandelbrot viewer on Cyclone V - Platform Designer layout

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

Stratix 10 Development Kit HiLo connector