Forum Discussion

PJais1's avatar
PJais1
Icon for New Contributor rankNew Contributor
6 years ago

Arria 10 : Uboot Configuartion Settings

Hello, I am building linux OS for our custom board which took reference from Arria 10 SoC . I build u-boot image by taking reference from https://rocketboards.org/foswiki/Documentation/A10GSRDGene...
EBERLAZARE_I_Intel's avatar
EBERLAZARE_I_Intel
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi,

After getting the new generated sof files, the handoff folder will be generated as well according to the new compilation.

Thus, a new uboot img need to be made again by the "make uboot" command in SoC EDS based on the new generated handoff folder.

I hope this is clear.

PJais1's avatar
PJais1
Icon for New Contributor rankNew Contributor
6 years ago

Hello,

Thanks for the help. I did the same earlier too. Actually, there was problem in DDR timing parameters , I have updated them in quartus tool, using DDR3 datasheet, and now uboot is sucsessfully build.

  • EBERLAZARE_I_Intel's avatar
    EBERLAZARE_I_Intel
    Icon for Regular Contributor rankRegular Contributor
    6 years ago

    Hi,

    Thanks for the update and I apologize for any delay in my responses.

    Let me know if more help needed.