Forum Discussion

New Contributor

6 years ago

Arria 10 : Uboot Configuartion Settings

Hello, I am building linux OS for our custom board which took reference from Arria 10 SoC . I build u-boot image by taking reference from https://rocketboards.org/foswiki/Documentation/A10GSRDGene...

EBERLAZARE_I_Intel

Regular Contributor

6 years ago

Hi,

Did you replace the DDR module? If yes may I know the data sheet for the DDR that you are using?

Which quartus version or you using? Can you share the uboot log?

Forum Discussion

Arria 10 : Uboot Configuartion Settings

Recent Discussions

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

PCIe Root Complex on DK-A5E013BM16AEA

Agilex™ 7 FPGA M-Series Development Kit_HBM2e Edition_REVB2_Altera

Agilex 7 R-Tile PIPE Direct endpoint receives Set_Slot_Power_Limit, but no Config TLPs

R-tile CXL base hard IP example for the Agilex 7 M-series Dev Kit (DK_DEV_AGM039EA) does not work