Forum Discussion

Honored Contributor

8 years ago

AND & OR, NAND & NOR, XOR & XNOR work inversely in MAX 10 Development kit

Hello geniuses, I am (new) working on MAX 10 Development Kit (10M50DAF484C6GES) using Quartus Prime 17.0 Lite Edition. My and & or program written in verilog in quartus software simulates funct...

Altera_Forum

Honored Contributor

8 years ago

How do you know it works inversely on the development board?

If this is your board: https://www.arrow.com/en/reference-designs/deca-development-kit-based-on-the-10m50daf484c6ges-max-10-fpga/178fffd04d89cbb578855555cb159a1a

the LEDs are ACTIVE LOW, so they will be ON when the output is LOW, and OFF when the output is HIGH. Is this what you believe is the 'inversely'?

Forum Discussion

AND & OR, NAND & NOR, XOR & XNOR work inversely in MAX 10 Development kit

Recent Discussions

CXL 2.0 support on the NEW Agilex™ 7 FPGA I-Series Development Kit (2x R-Tile and 1x F-Tile)

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Agilex5 HPS2FPGA usage

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Mandelbrot viewer on Cyclone V - Platform Designer layout