Forum Discussion
CHung
Occasional Contributor
Occasional ContributorAN881 reference design need to be upgraded for device 1SM21CH.
Hi, The following reference design is based on 1SM21BH device. https://fpgacloud.intel.com/devstore/platform/19.1.0/Pro/an881-pcie-avmm-dma-gen3x16-ddr4-and-hbm2/ We use Stratix 10 MX 1SM21C...
BoonT_Intel
Frequent Contributor
Frequent ContributorI also only have BHU MX board. I will suggest you download the 16G dev kit package and run the PCIE BTS test.
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-intel-s10-mx-devl-kit.pdf
CHungHi,
We have tried BTS, and BTS PCIe function is OK.
But BTS works by JTAG port, not PCIe connect.
So we still don't know how to let Linux communicate with FPGA through PCIe connector.
