Altera PCI API driver for PAC board

Question

Hi,
I programmed a PAC Arria10 board ( Quartus 19.1) with own HDL design. I had to modify the altera_pcie_win_driver.inf file to add my device (PAC).
but when I wanted to install the Altera PCI API driver I get:
"Windows encountered a problem... The hash for the file is not present in the specified catalog file"
Could I get an updated version of the Altera PCI driver that includes the PAC device (PCI\VEN_8086&amp;DEV_9C04&amp;SUBSYS_00008086&amp;REV_00). So I can have the updated catalog file and certified drivers.
Cheers

ericmunyew_c_intel · Answer

The Arria 10 PAC is for Linux platform as documented. The installation of Arria 10 PAC is not validated on Windows platform. Can you change to Linux.

https://www.intel.com/content/www/us/en/programmable/documentation/hhf1507759304946.html

ericmunyew_c_intel · Answer

You can refer to below for installing Arria 10 PAC in Linux platform.https://www.intel.com/content/www/us/en/programmable/documentation/iyu1522005567196.html

Forum Discussion

Altera PCI API driver for PAC board

2 Replies

Recent Discussions

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

CXL 2.0 support on the NEW Agilex™ 7 FPGA I-Series Development Kit (2x R-Tile and 1x F-Tile)

Agilex5 HPS2FPGA usage

Mandelbrot viewer on Cyclone V - Platform Designer layout