Forum Discussion

bluncan's avatar
bluncan
Icon for New Contributor rankNew Contributor
2 years ago

Agilex 7 I-Series FM87 hardware rework for AD9081

Hello,

I am trying to create a setup with an Agilex FM87 (dk-si-agib027fa) board and ADI AD9081. I looked over the FPGA's schematic and I saw that the board requires a hardware rework to support the AD9081. However, it is not exactly clear from the schematic what the hardware rework implies. I also saw that you have an interoperability report with a different Agilex and AD9081(https://www.intel.com/content/www/us/en/docs/programmable/709330/current/hardware-and-software-requirements.html) but it doesn't say anything about the rework either.

Could you give me some more information regarding that hardware rework?

Thank you!

Regards,

Bogdan

Board Debug
Fpga Devkit

2 Replies

  • Farabi's avatar
    Farabi
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hello,


    Apologies for late reply to you. Past few days was tracing the owner for this schematic and board design team. Just to update you currently we are tracing back the information down to board designer to get the information on the rework details. I will update you once we have the correct information.


    regards,

    Farabi


  • Farabi's avatar
    Farabi
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hello,


    Thank you for your patience.

    I have contacted you directly through email. I have send the rework instruction for your reference in that email.


    I am closing this case now.


    regards,

    Farabi