Forum Discussion
ABars4
New Contributor
New ContributorAccording to the Intel MAX 10 Clocking and PLL User Guide, there is an option to turn off the internal oscillators, in this case what are the phase noise requirements when using an external oscillator?
JonWay_altera
Frequent Contributor
Frequent ContributorFor MAX 10 PLL, you will need to meet the Input clock cycle-to-cycle jitter. See https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/max-10/m10_datasheet.pdf (Table 27)
