Contributor
Regular ContributorHi,
1) When FPGA is configured successfully, it will prompt something like "FPGA configured successfully" after loading the .rbf
2) Actually, this highly depends on the design on where the FPGA is actually loaded from, and the settings and configuration need to be set correctly. Additionally, there you may set the FPGA to load the full .rbf or loading split .rbf (peripheral and core rbf)
3) I recommend that you read the Arria 10 SoC Boot User Guide first on this,
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-a10-soc-boot.pdf
Also to take note, there is an Early IO release feature for Arria 10 SoC which can be enabled or disabled. More info you can find in below link, if you have more questions regarding it, let me know.
https://rocketboards.org/foswiki/Documentation/UBootA10EarlyIORelease
