Forum Discussion

JRe2s's avatar
JRe2s
Icon for New Contributor rankNew Contributor
11 months ago
Solved

10M02SCE144I7G programming through USB blasters fails

Hello team, the programming execution fails at 4%. Attached is the Quartus II project, a screenshot of the programming execution and the schematics of the FPGA. The programming file is the *.pof. D...
Board Debug
  • FakhrulA_altera's avatar
    FakhrulA_altera
    10 months ago

    Since you have solved your issues, I’ll transition this thread to community support. If you have any new questions, feel free to open a new thread to receive assistance from Intel experts. Otherwise, the community members will continue to help you here.


    Thank you for your engagement!


    Best regards,

    Fakhrul


sstrell's avatar
sstrell
Icon for Super Contributor rankSuper Contributor
11 months ago

Have you tried direct programming with a .sof instead of the .pof?

JRe2s's avatar
JRe2s
Icon for New Contributor rankNew Contributor
11 months ago

Hello team,

it seems that a programming once with a *.sof file and subsequent programming with a *.pof file with the check box "Enable real-time ISP to allow programming when available" avrivated is successfull. Can you confirm that?

Best regards,

Jochen