Forum Discussion

raulhs's avatar
raulhs
Icon for New Contributor rankNew Contributor
4 years ago
Solved

Uninitialized stratix10 devcloud nodes

Hi, I've been working with stratix10 nodes on devcloud, but out of the 3 online nodes (s001-n142, s001-n143, s001-n144) only 1 (s001-n142) has the FPGA initialized, which makes working hard when t...
  • DDIAKITE's avatar
    DDIAKITE
    4 years ago

    Hello,

    You need an aocx file to program the FPGA board. If you don't have one, you can find an aocx image in the bringup folder within the BSP installation folder that you're using. In the Stratix 10 case, you have an image here:

    /opt/intel/inteloneapi/intelfpgadpcpp/latest/board/intel_s10sx_pac/bringup/aocxs

    And you need

    aocl program acl0 pac_s10.aocx

    to initialize the FPGA.

    BTW: I have initialized the FPGA on node s001-n143.

    Regards,
    Daouda

DDIAKITE's avatar
DDIAKITE
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

Hello,

You need an aocx file to program the FPGA board. If you don't have one, you can find an aocx image in the bringup folder within the BSP installation folder that you're using. In the Stratix 10 case, you have an image here:

/opt/intel/inteloneapi/intelfpgadpcpp/latest/board/intel_s10sx_pac/bringup/aocxs

And you need

aocl program acl0 pac_s10.aocx

to initialize the FPGA.

BTW: I have initialized the FPGA on node s001-n143.

Regards,
Daouda