Forum Discussion
hkc
New Contributor
New ContributorPAC N3000 board BSP for OpenCL SDK?
Anyone has a N3000 BSP for OpenCL SDK?
What would be needed to modify existing A10_Soc ref kit to N3000?
1 Reply
HRZFrequent Contributor
There is no existing OpenCL BSP for the PAC N3000 board. You can try creating one based on the Arria 10 Development Kit BSP as outlined here:
However, note that this will require significant knowledge of low-level FPGA programming, Intel's IP cores and timing closure.
