Forum Discussion

vinutha's avatar
vinutha
Icon for New Contributor rankNew Contributor
4 years ago

OneAPI for a10_ref board

Hi,

I am trying to implement the FPGA flow with oneAPI. We have a10_ref board and hardware a10gx and would like to first implement an example vector-add code using the dpcpp compiler. Please let me know what should be the -Xsboard and how to execute using oneAPI toolkit and check the output using the hardware.

Thankyou,

Vinutha

3 Replies

  • BoonBengT_Altera's avatar
    BoonBengT_Altera
    Icon for Moderator rankModerator
    4 years ago

    Hi @vinutha,

    Thank you for posting in Intel community forum on your interest toward Intel OneAPI and hope all is well.
    To run the oneAPI example design, please do follow the guide here, there would be a details steps by step to walk you through.


    As for the mention Xsboard compilation flags, the programming guide will have further explanation for what inputs it should be.
    Hope that helps.

    Best Wishes
    BB

  • BoonBengT_Altera's avatar
    BoonBengT_Altera
    Icon for Moderator rankModerator
    4 years ago

    Hi @vinutha,


    Good day, just checking in to see if there is any further doubts in regards to this matter.

    Hope we have clarify your doubts.


    Best Wishes

    BB


  • BoonBengT_Altera's avatar
    BoonBengT_Altera
    Icon for Moderator rankModerator
    4 years ago

    Hi @vinutha,

    Greetings, as we do not receive any further clarification on what is provided, we would assume challenge are resolved. Hence thread will no longer monitor this thread. For new queries, please feel free to open a new thread and we will be right with you. Pleasure having you here.

    Best Wishes
    BB