Forum Discussion

monisha's avatar
monisha
Icon for New Contributor rankNew Contributor
4 years ago

max 10 GPIO VOH and VOL @IOH=8mA

Hi, I plan to use 10M25DC FPGA for to drive 7mA load @3.3V. As per MAX 10 General purpose I/O user guide, 3.3VLVTTL only have capability to drive 8mA(3.3V LVCMOS is 2mA maximum). Kindly correct me...
Ash_R_Intel's avatar
Ash_R_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

We do not receive any response from you to the previous answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you


jasmel's avatar
jasmel
Icon for New Contributor rankNew Contributor
2 years ago

Hello Ash_R_Intel.

We have a major concern because with the LVTTL for the MAX 10, you DON'T follow the Jedec JESD8-B for the VOL max of 0.40V. Your datasheet claim a higher value of 0.45V at 4mA.

The Jedec JESD8-B and JESD8-C request a VOL (max) = 0.40 at IOL 2mA.

Can you explain?

Regards,