Forum Discussion

HKim27's avatar
HKim27
Icon for Occasional Contributor rankOccasional Contributor
6 years ago

How to use pac_a10 with Intel FPGA SDK for OpenCL 19.2?

Hi, all. I use Intel® Acceleration Stack Version 1.2 with Intel® Programmable Acceleration Card with Intel Arria® 10 GX FPGA on CentOS Linux release 7.2.1511. Intel® Acceleration Stack Version 1.2 ...
PSath2's avatar
PSath2
Icon for New Contributor rankNew Contributor
6 years ago

Mylee, I am trying to find a solution to the same problem on the Intel DevCloud: (see post https://software.intel.com/en-us/forums/intel-devcloud/topic/832012). It also has the 17.1 pac_a10 BSP, but only the 18.1, 19.2, and 19.3 compiler stacks. (An Intel forum representative explicitly asked me to post in this forum. Since the OP and I have the same issue it felt most appropriate to tag on to this thread, but I can create a new post if necessary.)

The document you linked is not numbered by chapter so I am not following where 17.1 is listed as a hard requirement for OpenCL compilation. Can you provide a direct link to the relevant section? Is OpenCL support for the pac_a10 frozen at 17.1 (now two-years out of date)?