Forum Discussion

bitstreamer's avatar
bitstreamer
Icon for Occasional Contributor rankOccasional Contributor
6 years ago

Getting started with PCIe in Cyclone device

I have several boards, each has eight FPGAs on them. I'd like to use a PCIe root complex and have each FPGA contain a PCIe switch, and internally, an endpoint. Can someone point me in the right direc...
Nathan_R_Intel's avatar
Nathan_R_Intel
Icon for Contributor rankContributor
6 years ago

Hie,

You could start by referring to the Cyclone V PCIe user guide below.

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_c5_pcie_avst.pdf

The example design is available within our Quartus Prime software. Refer to Chapter 2 which describes how to get the example design and its project directory and hierarchy.

Alternatively, you could also refer to the following:

https://rocketboards.org/foswiki/pub/Projects/PCIeRootPort/CV_SoC_PCIe_RP.pdf

Regards,

Nathan