Forum Discussion

g_flamis's avatar
g_flamis
Icon for New Contributor rankNew Contributor
4 years ago

DE10-nano does not boot with OpenCL image 18.1

Hello, I am using the OpenCL image version 18.1 to my DE10-nano and several times to boot freeze at: mmc0: new SDHC card at address 0001 mmcblk0: mmc0:0001 SD16G 7.44 GiB mmcblk0: p1 p2 p3 EX...
BoonBengT_Altera's avatar
BoonBengT_Altera
Icon for Moderator rankModerator
4 years ago

Hi @g_flamis,


Apologies for the delayed in response, unfortunately per my understanding BSP for DE series devices are only available in on terasic website.

However I do notice from the terasic guide that it seens that the img are just a prebuild file which is for the demo, there is no dependencies on the executing other project.

Hence there should be no problem in proceeding to use the BSP from terasic and running other opencl example of chapter 2 onwards.

Hope that clarify.


Best Wishes

BB