Forum Discussion

JSYOO's avatar
JSYOO
Icon for New Contributor rankNew Contributor
2 years ago

DE-10 pro (stratix 10) oneAPI BSP

I currently have a DE-10 pro and wish to use oneAPI.

I could fine the BSP for opencl, but not one for oneAPI.

Is there a BSP for oneAPI?

Thanks

9 Replies

    • JSYOO's avatar
      JSYOO
      Icon for New Contributor rankNew Contributor

      Thank you, I will reach out to Terasic for support.

      In case there are no oneAPI BSP available, can you guide me with steps needed for me to develop this board using oneAPI?

      • whitepau_altera's avatar
        whitepau_altera
        Icon for Contributor rankContributor

        Option 1 will get you to a point where you can build IP and run it in hardware quickly, but you lose the oneAPI host features, your IP will be like any other IP in the Quartus® Prime IP catalog.

        Option 2 will require more configuration work, but will ultimately get you to a point where you can type 'make fpga' and get a fat binary that is automatically accelerated by your FPGA card.

        IMO unless you are planning to use the BSP for a long time and for many projects, option 1 is likely more stable and usable.

  • Hi @JSYOO,


    Greetings, just checking in to see if there is any further doubts in regards to this matter.

    Hope your doubts have been clarified.


    Best Wishes

    BB


  • Hi @JSYOO,


    Greetings, as we do not receive any further clarification/updates on the matter, hence would assume challenge are overcome. Please login to ‘https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. For new queries, please feel free to open a new thread and we will be right with you. Pleasure having you here.


    Best Wishes

    BB