Forum Discussion

MEghb's avatar
MEghb
Icon for New Contributor rankNew Contributor
5 years ago

cannot program the intel PAC with the provided hello-world bitstream **ERROR**: Interface ID check failed

I installed the Intel PAC recently and I followed the instructions to install the drivers. Now, when I wanted to initialize the bsp with hello_world.aocx I will get the following errors: aocl progra...
MEghb's avatar
MEghb
Icon for New Contributor rankNew Contributor
5 years ago

Thanks MeiYanL_Intel. Yes, the problem is with device temperature. Apparently fans were not good enough to cool the FPGA.

Mostafa