Forum Discussion

MEghb's avatar
MEghb
Icon for New Contributor rankNew Contributor
5 years ago

cannot program the intel PAC with the provided hello-world bitstream **ERROR**: Interface ID check failed

I installed the Intel PAC recently and I followed the instructions to install the drivers. Now, when I wanted to initialize the bsp with hello_world.aocx I will get the following errors: aocl progra...
MEIYAN_L_Intel's avatar
MEIYAN_L_Intel
Icon for Frequent Contributor rankFrequent Contributor
5 years ago

Hi,

Based on the error, it might be cause by the device temperature. You might need to adjust the fan speed setting to prevent the high temperature of the device.

Thanks