Forum Discussion

HMChin's avatar
HMChin
Icon for New Contributor rankNew Contributor
4 years ago

Altera Cyclone IV Alternatives

Hi, Our company is using Altera EP4CE15F17C8N on our printer's controller board and we are having part shortages now. I am thinking off using higher speed grade part, Altera EP4CE15F17C7N as an ...
Ash_R_Altera's avatar
Ash_R_Altera
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi,

As you are moving from slower speed grade '8' to faster speed grade '7', there should not be any timing issues. You should get better setup margin.

For hold timing, you may want to rerun timing analysis by create new timing netlist for new speed grade in the Timing Analyzer tool and check the report.


Regards