Most RecentWhy does simulation elaboration fail with port width mismatch for the F-tile Ethernet Hard IP 400GE-8 DR example design generated with VHDL when using QuestaSim* or Riviera-PRO* simulator?Why does the maximum observed channel-to-channel skew exceed 2 UI + 125 ps in an E-Tile transceiver under NRZ mode, even when TX PMA bonding is enabled?Is the timing model for Stratix® 10 1SX040, 1ST040, and 1SG040 FPGA devices correct?Critical Warning(25207): A programming file will not be generated because the assembler identified some pins have missing I/O Standard assignments. Refer to the I/O Assignment Warnings table in the fitter report for details.Why has my VCCL_HPS and VCCIO_HPS power estimates increased in the Quartus® Prime Pro Edition Software v26.1?Why is the power estimation of HPS core power rails inaccurate?Why Agilex® 3 FPGA speed grade 7 design may fail timing when using Configuration Clock IP?Why does Vendor Authorized Boot (VAB) certificate authentication failed in SDM?Why does the FCS‑client abort during provision‑data retrieval when the number of owner‑root‑hash slots is changed to 5?Why did the FCS client fail to verify the Vendor Authorized Boot (VAB) file?
