Most RecentHow do I implement the half-rate bridge option for connection to a full-rate memory controller?Why does the Pin Planner display incorrect differential pin pairs for device migration in MAX® V devices?The Quartus II software verion 14.1 does not include DDR3 I/O placement rules for MAX 10 devicesWhy the "Maximum Avalon-MM burst length" options in DDR2/DDR3 SDRAM UniPHY based Controller does not match with the other Platform Designer component like "Maximum burst size (words)" in Avalon®-Memory Mapped Pipeline Bridge?Why is a JTAG ID code error issued during configuration or programming with a JAM or JBC file?EMIF Maximum Frequency Specification Update for Stratix VHow do I set the PLL compensation targets for the Altera_PLL megafunction?ID:20621 3V I/O <text> has <number> enable signals and is locked at pins <text> of the same 3V I/O set. Only two enable signals are allowed.JESD204B IP Core Testbench (ip_sim) Errors for Variants with L>6Why am I not able to assign a 3.3 V input to a bank with VCCIO connected to 2.5 V
