Most RecentI write DFh to address 0 on "EPM240T100C5N" by the programmer, security is imposed on the CFM area and only 00 can be read. Is it possible to explain why security is applied even though Security bit is not set ?I wish to know the programming solutions of ALTERA EPM5128 chip, I like to read contents from master and then program other chipsI have a question on a FPGA P/N EP1C20F324C7 I want the signal DATADIR to go to gnd. Do I connect it directly to ground or do I Contact it to ground through a resister, and if I use a resistor what value should it be?EPCS16 SubstituteCHANGE_EDREG JTAG instruction via a JAM fileI want to know how I can provide "Loihi" Neuromorphic chip from Intel. It is not yet released but it can be used for research purposes. This question is not very straightforward, so I really appreciate if you can help me on that.Arial10 VCCT_GXB and VCCR_GXB Voltage should be 1.03V for PCIe 3.0?We have an electrical failure, please help us with the RMA# to return defective material.How can I repair the Development Kit?How to set SDC constraints for cross clock sample?
