rewingchow
New ContributorJoined 4 years ago
User Profile
New Contributor
User Widgets
Contributions
Cannot Program Stratix 10 MX board Anymore (Error Status: 18952)
After an attempt to program the Intel Stratix 10 MX board, which failed 17% into programming, every attempt to program fails from the beginning. Before the fail at 17% the board would program completely fine without issue. This was tested on Quartus Prime Pro 19.3, 20.1 & 21.1. This was also tested with multiple bitstreams. I have tried adjusting the Hardware Frequency and rebooting the system. I am receiving the following error: Device does not accept configuration request 18952. I have attached an image of the issue.1.4KViews0likes2CommentsHow to find platform designer tcl scripting commands?
Looking for a command to do the following in platform designer: Reload and Update All Components to reload signal and interface values from the corresponding IP component file. Not to sure if this is a Quartus command or a Qsys command.Solved1.2KViews0likes2CommentsError When Creating Project in Platform Designer in Quartus Prime Pro 19.3
Error: Failed to create Quartus Project, manually re-run the commands included in /hard_drive/randy/pigasus/hardware/scripts/quartus_sh_tcl_file_for_qsyspro.tcl in Quartus tcl shell. Occurs when creating new project through Platform Designer.Solved2.3KViews0likes6Comments