Knowledge Base Article
Why are the inputs and/or outputs from my Agilex® 7 FPGA device inverted?
Description
Due to a problem in the Quartus® Prime Pro Edition Software version 23.4 and later, signals from the banks listed below may be inverted. This only affects IO Cells where any of the IO registers are enabled.
| Device | GPIO Bank |
| AGIB041, AGID041 | 3C and 3D |
| AGFB006, AGFB008 | 3C and 3D |
| AGFB012, AGFB014 | 3C and 3D |
| AGFB019, AGFB023, AGFD019, AGFD023 AGIB019, AGIB023, AGID019, AGID023 | 3A and 3B |
| AGFB022, AGFB027 AGIB022, AGIB027 | 3C and 3D |
Resolution
To work around this problem, disable register packing for these GPIO banks.
This problem has been fixed starting with Quartus® Prime Pro Edition software version 25.1.1.
Updated 3 months ago
Version 6.0No CommentsBe the first to comment