Knowledge Base Article

Why am I seeing a linkup problem when using consortium mode for F-tile Ethernet Hard IP with Auto-Negotiation and Link Training (AN/LT) and Dynamic Reconfiguration enabled designs?

Description

Due to a problem in the Quartus® Prime Pro Edition software version 25.1.1, you may see a linkup problem for F-tile Ethernet Hard IP with Auto-Negotiation and Link Training (AN/LT) and Dynamic Reconfiguration enabled designs using Consortium mode. 
This is due to the consortium_next_page_send not being asserted. 
 

Resolution

To work around this problem, when Advertise Consortium Port Ability is set in the GUI, set register enable_consortium_next_page_send (0x300[8] =1).
This problem is fixed beginning with the Quartus Prime Pro Edition software version 25.3.

Updated 4 months ago
Version 4.0
No CommentsBe the first to comment