Knowledge Base Article
Error-[XMRE] Cross-module reference resolution error ./../..//../../ed_sim_tb/ed_sim_tb.sv, 286
Description
You may see the error message below from Synopsys VCS* and VCS MX when using the Agilex™ 3 FPGA and Agilex™ 5 FPGA MIPI D-PHY Design Example, and Link 0 is set to RX mode and Link 1 is set to TX mode.
Error-[XMRE] Cross-module reference resolution error
./../..//../../ed_sim_tb/ed_sim_tb.sv, 286
Error found while trying to resolve cross-module reference.
token 'ppi_tg'. Originating module 'ed_sim_tb', first module hit 'ed_sim_tb'.
Source info: while
((ed_sim_tb.ed_sim.dut.tg.tg.dphy_ppi_tg_inst.tg.tg_inst.PPI_RTL.ppi_agents[0].ppi_tg.ppi_gen.tst_cnt
!== 'b1)) #(20000.000000000000) ;
Resolution
To work around this problem, please regenerate the MIPI D-PHY IP design example with Link 0 set to TX mode and Link 1 set to RX mode.
Updated 4 months ago
Version 7.0No CommentsBe the first to comment