foisal
New Contributor
New ContributorXADC simulation
Is it possible to simulate Xilinx XADC in Questa Sim 10.6_1 simulator? I like to instantiate the XADC module in the top-level testbench module to overserve the temperature or voltage value.
Forum Discussion
SyafieqS
Super Contributor
Super ContributorHi Ahmed,
Assuming you want to run Questa independently, I would yes. If no, I don't think so.
Are you running Intel FPGA Questa in Xilinx environment? Xilinx should have their own simulation tools to be ran from their side. If you want to run Xilinx design in Intel FPGA, You first need to do migration before you can do any simulation, you can look into the document here on how to do the migration: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/an/an307.pdf
Look for area:
3. FPGA Tools Comparison 4. Xilinx to Intel FPGA Design Conversion
After that, you can just launch the Questa mention in
3.3.12. Simulation
