Forum Discussion

Occasional Contributor

7 years ago

Using Intel Arria10 PAC card in 10G mode

Hi, The Intel Arria10 PAC card has a QSFP+ port. Is it possible to use it in 10G mode, i.e. can i just use one channel of the QSFP+ port to get 10G connection? I assume that i will need to use a QS...

SengKok_L_Intel

Regular Contributor

7 years ago

Hi, Yes, you can just use one QSFP port for 10G connection. Below is the documentation link for A10 PAC including the 10G Ethernet user guide https://www.intel.com/content/www/us/en/programmable/products/boards_and_kits/dev-kits/altera/acceleration-card-arria-10-gx/documentation.html Regards -SK

Forum Discussion

Using Intel Arria10 PAC card in 10G mode

Recent Discussions

Unique ID registers in Cyclone V

Audio interface with Agilex 5 A5ED065BB32AI4S

Operating system kernel-level FPGA bridge communication

Routing PL DDR to PS

Validating ECC Functionality on Custom Agilex 5 SOM in Linux Kernel