Forum Discussion

서박사's avatar
서박사
Icon for Occasional Contributor rankOccasional Contributor
4 years ago
Solved

U-Boot Failure using Terasic Ubuntu Image

Hello, I'm opening a new thread to make a new question, but I think this is quite related to my prior question. I'm trying to use Ubuntu OS at DE1-SoC board, through HPS. So I tried to use the ...
Yoshiaki_Altera's avatar
Yoshiaki_Altera
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

Hello 서박사,

I have been similar experience with wrong DTB.

Please check DTS(DTB) first.

Best regards,

Yoshiaki Saito

서박사's avatar
서박사
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

Hello Yoshiaki!

Thank you for the prompt answer.

I've tried to replace DTB file from GHRD and I think it worked for me to boot the device.

Also, replacing zImage file from GHRD also worked.

However, although the device has been booted successfully, I cannot run any program using Altera function.

I've opened an individual thread for this issue a few days ago, so I would not ask you for the aforementioned issue here.

I'm still confused why the DTB file from the reference image (https://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&No=836&PartNo=4) is wrong.

For this, is there any method to check if the DTB file is "proper"?

(I don't think DTB and zImage are related to each other, but DTB and .rbf file are related together)