SoC FPGA boot from QSPI flash

Question

I get a baremetal application with cyclone V Soc fpag.
How I can boot from spi flash?

eberlazare_i_intel · Answer

Hi there,
To boot QSPI using the latest version of U-boot, you may refer below:
https://rocketboards.org/foswiki/Documentation/BuildingBootloader#Cyclone_V_SoC_45_Boot_from_QSPI
Let me know if any help needed to execute the above.
Have a nice day.

tbaox · Answer

I want to boot a baremetal program from QSPI flash, not u-boot.
Something wrong when SPL loads the baremetal image.
Someone says that the baremetal program has not a start.s file, so it can not boot from QSPI.

eberlazare_i_intel · Answer

Hi,
Unfortunately, we do not have the example designs with pre-built images to boot from QSPI in baremetal available,
However for reference, you may refer below device guidelines and Baremetal tutorial below:
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/an/an-cv-av-soc-ddg.pdf#page=32
https://rocketboards.org/foswiki/Documentation/SoCEDS#Cyclone_V_Bare_Metal_Example_Using_SoC_EDS_Standard_Edition

Forum Discussion

SoC FPGA boot from QSPI flash

3 Replies

Recent Discussions

Unique ID registers in Cyclone V

Audio interface with Agilex 5 A5ED065BB32AI4S

Operating system kernel-level FPGA bridge communication

Routing PL DDR to PS

Validating ECC Functionality on Custom Agilex 5 SOM in Linux Kernel