Forum Discussion

eng6138's avatar
eng6138
Icon for New Contributor rankNew Contributor
3 years ago
Solved

RiscFree IDE with Arria 10 SoC Dev Kit - Debugger errors while launching bare metal project

Following these instructions: https://www.intel.com/content/www/us/en/docs/programmable/730783/22-3/debug-setup-for-hard-processor-system.html The GHRD has been compiled and loaded to the Intel A...
  • tehjingy_Altera's avatar
    tehjingy_Altera
    3 years ago

    Hi eng6138


    Sorry for the late reply.

    It seems like the project created for Agilex & CycloneV in RiscFree is not compatible to the Arria10 board.

    I too got trouble trying to create a project for Arria10.

    At the moment the RiscFree is still new to Intel that is why there are not much project created.


    However I did find another IDE to debug the Arria10 baremetal.

    https://www.rocketboards.org/foswiki/Documentation/SoCEDS#Install_ARM_DS

    It is using the Arm DS.


    Regards

    Jingyang, Teh


tehjingy_Altera's avatar
tehjingy_Altera
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hi


Since this thread been resolve, I shall set this thread to close pending. If you still need further assistance, you are welcome reopen this thread within 20days or open a new thread, some one will be right with you. Please login to ‘https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.


If you happened to close this thread you might receive a survey. If you think you would rank your support experience less than 10 out of 10, please allow me to correct it before closing or if the problem can’t be corrected, please let me know the cause so that I may improve your future service experience.


Regards

Jingyang, Teh