Forum Discussion

eng6138's avatar
eng6138
Icon for New Contributor rankNew Contributor
3 years ago
Solved

RiscFree IDE with Arria 10 SoC Dev Kit - Debugger errors while launching bare metal project

Following these instructions: https://www.intel.com/content/www/us/en/docs/programmable/730783/22-3/debug-setup-for-hard-processor-system.html The GHRD has been compiled and loaded to the Intel A...
  • tehjingy_Altera's avatar
    tehjingy_Altera
    3 years ago

    Hi eng6138


    Sorry for the late reply.

    It seems like the project created for Agilex & CycloneV in RiscFree is not compatible to the Arria10 board.

    I too got trouble trying to create a project for Arria10.

    At the moment the RiscFree is still new to Intel that is why there are not much project created.


    However I did find another IDE to debug the Arria10 baremetal.

    https://www.rocketboards.org/foswiki/Documentation/SoCEDS#Install_ARM_DS

    It is using the Arm DS.


    Regards

    Jingyang, Teh


tehjingy_Altera's avatar
tehjingy_Altera
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hi eng6138


Sorry for the late reply.

It seems like the project created for Agilex & CycloneV in RiscFree is not compatible to the Arria10 board.

I too got trouble trying to create a project for Arria10.

At the moment the RiscFree is still new to Intel that is why there are not much project created.


However I did find another IDE to debug the Arria10 baremetal.

https://www.rocketboards.org/foswiki/Documentation/SoCEDS#Install_ARM_DS

It is using the Arm DS.


Regards

Jingyang, Teh